Question 1

What is a Thorough Examination for a forklift truck?

Accepted Answer

A Thorough Examination is the mandatory inspection required by law to ensure the mechanical parts of a forklift truck are in safe working order. It is required under LOLER 1998 (covering lifting components such as mast, forks, and chains) and PUWER 1998 (covering vehicle safety components such as brakes, steering, and tyres). It is carried out by a competent person at legally specified intervals — at least every 12 months for most forklift trucks, or every 6 months for equipment used to lift people. It is not the same as a routine service or maintenance inspection.

Question 2

What is a LOLER inspection for a forklift?

Accepted Answer

A LOLER inspection is the common name for a Thorough Examination — the mandatory inspection required under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER). However, a genuinely thorough Thorough Examination must also cover PUWER 1998 (Provision and Use of Work Equipment Regulations), which governs the vehicle's safety components including brakes, steering, and tyres. An inspection that only covers LOLER is incomplete and leaves the employer potentially non-compliant with PUWER. A CFTS Thorough Examination always covers both LOLER and PUWER requirements in a single visit.

Question 3

What is CFTS?

Accepted Answer

CFTS is the UK forklift industry's national accreditation scheme for Thorough Examination, created in 2004 by BITA and the FLTA (now the UKMHA) in consultation with the Health and Safety Executive. It is the only scheme providing a unified national standard for forklift Thorough Examinations covering both LOLER 1998 and PUWER 1998. Nearly 800 member depots and more than 2,500 registered competent persons across the UK and Republic of Ireland are accredited to CFTS. The CFTS mark on a Report of Thorough Examination guarantees the examination is full, valid under law, and carried out by a trained engineer to the industry's agreed quality standard.

Question 4

How often does a forklift need a Thorough Examination?

Accepted Answer

Most forklift trucks require a Thorough Examination at least every 12 months. Equipment used to lift people, and all lifting accessories and attachments, must be examined at least every 6 months. An examination is also required following any exceptional circumstances that could jeopardise safety — such as an accident, overloading, or significant impact. A competent person may agree an examination scheme specifying different intervals based on the type of truck, its use, operating hours, and environment.

Question 5

Who is responsible for arranging a forklift Thorough Examination?

Accepted Answer

The employer of the forklift operator is responsible for ensuring a valid Thorough Examination is in place, whether the truck is owned, leased, or hired on a long-term basis. For short-term hire arrangements of less than 12 months, the hire company carries the responsibility as owner. In all cases, the employer of the operator must ensure the truck has a valid Report of Thorough Examination and must be able to produce it when requested by an enforcement officer.

Question 6

How do I find a CFTS-accredited examiner near me?

Accepted Answer

CFTS maintains a register of all accredited companies and registered competent persons across the UK and Republic of Ireland. Use the postcode search tool on thoroughexamination.org to find your nearest CFTS-accredited company. With nearly 800 accredited company depots across the UK and Ireland, a CFTS Thorough Examination is available nationwide.

Question 7

Is a service or maintenance inspection the same as a Thorough Examination?

Accepted Answer

No. The Health and Safety Executive states clearly: 'Your regular inspections as part of a preventive maintenance scheme or scheduled service are not a thorough examination.' A Thorough Examination under LOLER and PUWER is a separate statutory requirement carried out by a competent person. A truck can be fully serviced and still be non-compliant if no Thorough Examination has been carried out. The two can be completed on the same visit, but the Thorough Examination must be conducted and documented first.

Question 8

How do I become a CFTS-accredited company?

Accepted Answer

Companies that service, inspect, and maintain forklift trucks and wish to carry out Thorough Examinations can apply for CFTS accreditation at thoroughexamination.org. Applicants must provide detailed information about the staff who will carry out Thorough Examinations — including their qualifications and experience — along with details of facilities, equipment, and training programmes. All accredited companies must commit to the CFTS Quality Assurance Procedural Code and accept independent assessment and a formal complaints procedure.

Thorough Examination

A guide from CFTS

Accredited companies

HVS (NW) Ltd

Ian Baxter Specialist Blacksmith & Agricultural Engineer

Ian Scott Forklifts

Independant Linde Services Ltd

Interface Vehicle Services Ltd

Invicta Forks & Attachments Ltd

Irelands Farm Machinery

Island Forklifts Ltd

J C Engineering

J Foster Engineering Ltd

J G Morrison Engineering

J G Paxton & Sons Ltd

J G Paxton & Sons Ltd

J G Paxton & Sons Ltd

J G Paxton & Sons Ltd

J G Paxton & Sons Ltd

J G Paxton & Sons Ltd

J M Coles Ltd

J Todd Plant Services Ltd

J Tweedie Engineering

CONTACT US

QUICK LINKS

USEFUL LINKS